Easton .344" Nanolite Poles

The Easton nanolite tube is made from high-strength aerospace 7075-T9 aluminum alloy. It is designed to match the stiffness of Easton Expedition .340" at 15 percent weight savings, making it the strongest, ultralite aluminum tent pole on the market. It is almost as light as the Easton Carbon FX pole. It has a scratch resistant hard-anodized surface.

Weight: 16" w/ insert - 0.6oz; 16" w/o insert - 0.5oz.

• Main tube outside diameter: 0.344"
• Main tube inside diameter: 0.306"
• Grains per inch: 13.8 gpi
• Ult. tension strength: 96,000 psi

Easton .490 Expedition Poles

The Easton expedtion tube is made from high-strength aerospace 7075-T9 aluminum alloy. It is designed to withstands high-stakes expeditions, extreme weather, and weekend backpacking. It is specified by the U.S. Marine Corps and is the main-stay for extreme weather expeditions. It utilizes a scratch resistant hard-anodized surface.

Weight: 16" w/ insert - 1.17oz; 16" w/o insert - 0.98oz.

• Main tube outside diameter: 0.490"
• Main tube inside diameter: 0.438"
• Grains per inch: 26.9 gpi
• Ult. tension strength: 96,000 psi

Easton .625" Expedition Poles

The Easton expedtion 0.625" diameter tube is made from high-strength aerospace 7075-T6 aluminum alloy. It is designed to withstands high-stakes expeditions, extreme weather, and anywhere that high strength is required. It utilizes a scratch resistant hard-anodized surface.

Weight: 16" w/ insert - 2.15oz; 16" w/o insert - 1.8oz.

• Main tube outside diameter: 0.625"
• Main tube inside diameter: 0.549"
• Grains per inch: 49.7 gpi
• Ult. tension strength: 96,000 psi

Vinyl End Caps

These 100 percent vinyl end caps slip over the ends of aluminum tubes. They make excellent ends for slipping into reinforced tent pockets.

Aluminum Locking Tips

The aluminum locking tips are glued into the ends of tubes. They are not used for tie off with shock cord. They interlock with #1 (5/16" diameter) grommets.

Dome Tip

These dome (rounded) end tips are glued into the aluminum tubes. They make excellent ends for slipping into reinforced tent pockets.

Delrin Locking Tie Off

These locking tips are made from 100 percent Delrin. They are perfect for tie off with shock cord. They interlock with #1 (5/16" diameter) grommets.

Easton Stakes

These Easton stakes are made in USA from 7075-T9 aluminum tubing. They have a solid aluminum head and a durable swaged point. Nylon cord runs through the cap for easy removal and extra tie-down capability in severe wind. The nanolite stake is 6" long; backpacker, 8".

Weight: nanolite - 0.35oz; backpacker - 0.49oz.

Pre-Made Tent Poles

We use only Easton aluminum poles for our pre-made tent poles. They are properly sized for the intended tent. Pre-assembled with vinyl ends and shock cords for easy take down and make up. Black anodized surfaces.

Shock Cord

This is a heavy-duty stretchy shock cord with a tough abrasion resistant nylon cover. Excellent for shock-corded tent poles.